create cut vector and etch vector inkscape

add a base view in 1:1 scale from that part.For every part you want to cut from that plate repeat step 6-8.set the page size to the size of the plate you want to cut from.the unfolded version of that part you need to laser-cut.If you have bended sheet metal (or plastic) parts 'Add flat pattern' which creates.pdf, imported it in Inkscape doing some post processing and then saved the final. In overview I combined the involved parts into a cutting template as an ids-drawing, exported that as. Here is the final attempt that succeeded. I made several attempts that failed (see below).

This poses the problem of how to make a 2D cutting template from several Inventor parts and how to export these as svg. , ) accept a file for cutting several parts at once but require. Some companies that offer laser cutting accept dxf-files of individual parts which can be readily exported using 'Export Face As.'. Laser cutting is a very versatile and practical technique to produce 2D parts or even 3D parts by bending 2D sheets. delete unwanted pieces inside the small circleĪnd finally, you'll want to either Combine or Group the resulting lines, to make it easy to move them over to the main drawing.How to make svg-files for laser-cutting with Autodesk Inventor.

Path menu > Cut Path (The circle will disappear, as before.).select the combined lines and the circle.only a few of those lines need to be cut, to make the inner circle, so select only those, and do Path menu > Combine.Delete the outer pieces of the lines that were cut.

But actually, the lines have been cut where the circle crossed them.)

Path menu > Cut Path (The outer circle will disappear, and it might look like nothing else happened.

make sure the circle is on top in z-order.

select the outer circle and the combined lines.

select all the lines and do Path menu > Combine.

But here are new instructions, now that I see the whole thing. If you really just want the lines, what I said before should work, although you'll end up with an extra circle. If you are eventually going to color in the stripes, you need to follow Tyler Durden's video. Before, somehow I did not connect the 2 images to each other.

Create cut vector and etch vector inkscape